Horizon Global 24989 Instrucciones De Instalación página 5

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

4. Remove the taillights – From inside of the trunk, pull felt liners back to access taillight thumb bolts. Remove the thumb bolts of taillights by rotating with hand
inside interior panel in trunk. Disconnect the wire harness from taillights by opening the clip. Remove the taillights by gently pulling rearward.
5. Remove the rear fascia – a.) On outside of upper fascia, push down on fascia clips to release the upper fascia from vehicle plastic frame while gently pulling outward.
b.) & c.) While taking out the upper fascia carefully unplug (2) kick sensor cable plugs that are attached to inside of fascia. Then remove the upper fascia completely that
includes the lower fascia.
a.)
b.)
c.)
©2019 Horizon Global Americas Inc. - Printed in Mexico
Sheet 5 of 21
24989NP
10-08-19
Rev. A

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

77989Cqt24989

Tabla de contenido