marklin Rtz Serie Manual De Instrucciones página 43

Auxiliary functions in digital operation with
the 6021 Control Unit 6021
Prerequisite: The locomotive decoder in Locomotive
No. 2 and the function decoder in Transport Car 2
must have the same address. The function decoder
in Locomotive No. 1 must have another address
set on it:
1. Address for Locomotive 2 / Transport Car 2
function: Headlights in Locomotive 2 on / off
f1: Auxiliary lights /
warning light on Locomotive 2 on / off
f2: Trackside lights /
warning lights on Transport Car 2 on / off
f3: TELEX coupler on Transport Car 2 on / off
f4: Low speed range on / off
Important: The TELEX coupler must not be left on
constantly. If it is, the internal overload protection
will be activated.
2. Address for Locomotive 1
function: Headlights in Locomotive 1 on / off
f1: Auxiliary lights /
warning light on Locomotive 1 on / off
f2: Trackside lights / warning lights on the
cars coupled to this locomotive on / off
(by means of current-conducting coupler)
f3: Sound effect of high pitched horn on / off
f4: Sound effect of low pitched horn on / off
80
f3
control unit
43