Intended Use - IKRA IBF 43 Instrucciones De Manejo

Petrol brush cutter IBF 43
CONTENTS
PICTURES

1. INTENDED USE

2. IDENTIFICATION OF MAIN COMPONENTS
3. SYMBOLS
4. SAFETY REQUIREMENTS
5. MACHINE ASSEMBLY
6. PREPARING TO WORK
7. HOW TO START - USE - STOP THE ENGINE
8. USING THE MACHINE
9. MAINTENANCE AND STORAGE
10. TROUBLESHOOTING
11. DISPOSAL AND ENVIRONMENTAL PROTECTION
12. WARRANTY
13. SPARE PARTS
13. RATINGS
15. EC DECLARATION OF CONFORMITY
1. INTENDED USE
The device is intended for cutting lawns and grass areas. The observance of the manufacturer's operating instructions
included is a prerequisite for the proper use of the device. Any other use that is not expressly permitted in these instruc-
tions can lead to the device being damaged and a serious risk for the operator. Observe the restrictions in the safety
instructions. Please note that our device has not been designed with the intention of it being used for commercial, trade
or industrial applications. We accept no liability if the device is used in commercial, trade or industrial operations or
corresponding activities.
Attention! Due to bodily endangerment of the operator the following work must not be undertaken with the motor scy-
the: Clearing pathways and as a chipper for shredding tree and hedge cuttings. Furthermore, the motor scythe must not
be used for levelling bumps in the ground such as mole hills for example. For safety reasons the motor scythe must not
be used as a drive unit for other tools or tool sets of any type. The machine must only be used for its intended purpose.
Any other use shall be considered improper use. The user/operator, and not the manufacturer, is responsible for any
damage or injuries arising from this.
GB | Operating Instruction
GB-1
Translation of the original Operating Instructions
Page
1 - 3
GB-1
GB-2
GB-3
GB-4
GB-6
GB-7
GB-7
GB-8
GB-10
GB-11
GB-12
GB-12
GB-12
GB-13
GB-14