Krups BeerTender Manual De Instrucciones página 14

1-BeertenderonewayB90US.qxd:1-B95onewayAmsterdam_UK.qxd29/01/089:22Page12
The BeerTender The BeerTender
Problem Possible causes
produces too DraughtKeg has
much foam when not reached the
dispensing beer. right dispensing
temperature.
The tap handle is
being moved too
slowly.
The DraughtKeg
has been shaken.
The Volume Level The Scale needs
indicator is to be reset with
blinking. each new
DraughtKeg.
12
Allow the
Solutions
BeerTender
DraughtKeg to
cool to the right
temperature.
Firmly and quickly
pull the handle
down and forward
as far as it will go.
Wait 4 hours
before dispensing
beer.
Turn the power on
before inserting
DraughtKeg. If
DraughtKeg is
inside, open the
BeerTender Cover
and lift up the
DraughtKeg for 3-
5 seconds before
replacing into
machine.