Troubleshooting - MZ electronic HC020 Instrucciones De Uso

Troubleshooting

FAULT
STOP
3.2
NO SENSOR
13.6V
LOW VOLTAGE
3.2
0 mt/m
13.6V
Warranty
We guarantee our products from manufacturing defects for 2 years from the purchase date (purchase
ticket or any other purchase proof will be requested). Guarantee does not include damages and breakage
during the transport, damages and breakage due to faulty installation or improper use. Warranty is no
longer valid when repairs or servicing have been made by unauthorized people or made with spare parts
which are not original. Warranty does not include the complete replacement of the goods and refers
exclusively to the replace of faulty pieces and necessary labour. It does not include transfer or transport
expenses. The Customer will not ask for expenses refund.
HC020
m
m
CAUSE
Though UP or DOWN keys
are pressed, the instrument
doesn't receive any signal
from the magnetic sensor
for more than 5 seconds.
The instrument's
supply voltage is lower than
10V.
30
English
CORRECTIVE ACTION
Check the sensor electric
connections.
Check if sensor operates
properly. If not, replace it.
Check the position of
sensor and magnet on
gipsy and their distance (3
mm).
Check the operation of
electric installation or
anchor windlass.
power
Verify the battery charge or
operation of the electrics
system.
Rev. 01-2020