Husqvarna 27012945000 Manual Del Usuario página 16

16
- Pull off hose .
- Take evaporate emission control valve
remove with hose.
NOTE
The evaporate emission control valve will not be refi tted.
- Remove valve .
- Mount the screw with seal ring
10 Nm (Loctite 243).
Preassembly of tuning air fi lter box
- Remove screws from original air fi lter box.
- Take off the top of the air fi lter box and remove air fi lter.
- Release hose clips and
on tuning air fi lter box (included).
Assembly of tuning air fi lter box
- Connect connector of the intake air temperature sensor.
- Position the air fi lter box.
- Position engine electronics control unit
from the holder and
(both included) and tighten to
from original air fi lter box and mount
.