Husqvarna 27012945000 Manual Del Usuario página 18

18
- Attach open air fi lter box lid
fi lter box and fold down.
- Mount original screws and tighten to 2 Nm.
- Mount ignition lock cover
- Position the voltage regulator.
- Mount screws and tighten to 10 Nm.
Mounting of main silencer
- Remove screws .
- Take off heat guard.
- Loosen screw .
- Remove screw .
- Remove the main silencer with the screw clamp.
- Position main silencer (included) with screw clamp from the
mounting kit (included).
- Mount screw with washer and nut from mounting kit
and tighten to 25 Nm.
- Position screw clamp and tighten screw to 12 Nm (copper paste).
(included) into the front of the air
.
(included)