ENTRANCE PANEL/CAMERA identification code
If more cameras/entrance panels are installed on the building it is neces-
sary to identify the cameras with a different code. The identification code is
assigned by inserting the jumpers in the contacts as shown on the figure.
12V
LED Ch2
Name tag lighting
Microphone
LED
EN
Lens orientation
Camera unit Type. 68TU/K (68TC/K) can be adjusted manually on the ver-
tical and horizontal axis to improve the shooting angle, the screw on the
upper side of the lens loosen, turn the lens in the required direction and fix
the screw.
Fig.14A
Fig.12
1st camera
IT=0
(Default)
2nd camera
IT=1
Fig.13
Name tag lighting
LED
2nd push-button
ENTRANCE PANEL FOR VIDEO DOOR ENTRY SYSTEMS
Before installing equipment, choose location for camera entrance panel: the
camera shouid be protected from direct light (sun, car headlights, etc.) as
this may affect the quality of the picture, and may damage the camera. It is
advisable to protect panel with some form of weatherproof shelter.
1st push-button
The video camera is equipped with LEDs for night illumination of the subject
up to a distance of 1 metre approx.
Fixing screw
Fig.14B
11