Vimar ELVOX 68IA/R Instrucciones Instalador página 8

DESCRIPTION
Type 68IA/R (B/W videokit)
Petrarca series B/W video door entry kit for single-family installations, com-
prising: 1 1300 series entrance panel in electro-polished anodised aluminium
for flush or surface wall-mounting with 1 call button (type 13K1), complete
with pan/tilt camera with speech unit (type 68TU/K), and 1 additional key
(type R131) for converting the entrance panel for two-family kits, 1 Petrarca
series surface wall-mounted door entry monitor with low-profile 4" B/W
screen (type 6029 + 62I8), complete with fixing plate (type 6145), 1 power
supply unit (type 6922.1). The interphone is supplied with 5 push-buttons (1
for door lock release, 1 for self-start and 3 for intercom calls). The kit can be
expanded to include up to 2 external entrance panels with a maximum of two
calls and 4 monitors/interphones.
Type 68IA/RC (colour videokit)
Petrarca series colour video door entry kit for single-family installation, com-
prising: 1 1300 series entrance panel in electro-polished anodised aluminium
for flush or surface wall-mounting with 1 call button (type 13K1), complete
with pan/tilt camera with speech unit (type 68TC/K), and 1 additional key
(type R131) for converting the entrance panel for two-family kits, 1 Petrarca
series surface wall-mounted door entry monitor with 3.5" TFT LCD colour
screen (type 6029/C + 62I8), complete with fixing plate (type 6145), 1 power
supply unit (type 6922.1). The interphone has 5 buttons (1 for door lock
release, 1 for self-start and 3 for intercom calls). The kit can be expanded to
include up to 2 external entrance panels with a maximum of two calls and 4
monitors/interphones.
INTERCOMMUNICATING INTERPhONE FOR 2-WIRE VIDEO-KIT
Type 62I8 is an interphone in the Petrarca series for intercommunicating
versions of the 2-wire video kitswith monitor Art. 6029 (6029/C) by means of
bracket type 6145 or desk-topversion type 6142. Supplied with 5 push-but-
tons, one for door lock release, one for self-start of the interphone in sys-
tem, even when not called, and 3 push-buttons for intercom calls; another
2 push-buttons can be added for auxiliary services. The interphone can be
combined with type 6153/682 for call volume adjustment and for call denied/
door lock open signals. The interphone is supplied with 3 push-buttons for in-
tercom calls. To exclude the intercom function, disconnect the push-buttons
from the respective terminals (10, 11, 12).
Connection terminal board
4) Additional pushbutton common
8) Auxiliary service 1 (enables activation of relay type 682R).
9) Self-activation
10) 1st intercommunicating call.
11) 2nd intercommunicating call.
12) 3rd intercommunicating call.
13) Auxiliary service 2 (enables activation of relay type 682R).
1, 2) BUS line.
4, 6P) Connection for door call pushbutton.
5, 6S) Connection of additional door ringtone Type 860A (see variant).
-, +) Additional supply voltage only by type 6923.
They are used if the simultaneous activation of two or more monitors
is required (maximum 4 monitors).
Video) Connector for connection of monitor type 6029 (6029/C)
Controls and adjustments
The call volume can be adjusted by moving the loudspeaker wirefrom con-
nector A+ to A-; otherwise use accessory type 6153/682.
Carratteristiche tecniche del monitor in B/N Art. 6029
- Surface wall-mounted monitor in ABS.
- Surface wall-mounted monitor with flat screen Kinescope CRT 4" in B/W.
- Standard video signal CCIR 625 lines, 50 images
- Operating temperature: 0° to + 40° C
Carratteristiche tecniche del monitor a colori Art. 6029/C
- Surface wall-mounted monitor in ABS.
- Slim-line surface wall-mounted monitor with 3,5" LCD TFT colour screen
- Video signal standard: PAL type G.
- Operating temperature: 0° to + 40° C
Controls (see fig. 5)
- Brightness adjustment using control "A".
- Contrast adjustment using control "B".
8
INSTALLATION MONITOR WITh INTERPhONE
Fig. 1 - Fix the bracket type 6145 to the wall at a height of approximately 1.4
m above the ground.
Fig. 2 - 3 Open the interphone, split the cover from the bottom making pres-
sure on the lower side of the cover
Fig. 4 - Fit the base of the interphone into the appropriate seats to the left
of the bracket. Slide the base of the interphone downwards until it
is completely fastened. Connect the wires to the terminals of the
interphone and monitor card.
Fig. 5 - Connect the wiring of the monitor to the connection card by means
of connector CN1 on the card.
Fit the monitor in the appropriate seats in the bracket. Slide the base
of the monitor downwards until it is completely fastened.
Fig. 6 - Close the interphone by hooking the cover onto the base and press-
ing the bottom of the cover until it clicks shut. To remove the in-
terphone or monitor from the bracket, press the safety tab with a
screwdriver in the direction of the arrows.
Fig. 1
1,40
Fig. 4
Fig. 5
VIDEO
B
A
Fig. 2
Fig. 3
Fig. 6
EN