ION U-CAST Instrucciones De Montaje página 11

Figure 2: Select USB Audio Device from Preferences
8. Under the Quality tab, set the Default Sample Format to 16-bit.
9. Select OK to save your settings and close the Preferences window.
10. At the top of the main Audacity window, to the right of the play control
buttons, you will see the input and output level meters (labeled L and R).
Under the output level meter, is an icon that looks like a microphone.
Next to the microphone is a black arrow that points down. Click this arrow
and select Monitor Input. (If you don't see the input and output level
meters, open your Preferences again as described above, select the
Interface tab, and make sure that Enable Mixer Toolbar is checked.)
You should be all ready to record.
These settings will be saved when you exit. However, you will need to select
Monitor Input from the input meter's drop-down menu each time you launch
Audacity.
All manuals and user guides at all-guides.com
11