ION U-CAST Instrucciones De Montaje página 9

8. Select the Audio tab at the top
of the Sounds
Devices control panel.
9. Under Sound
choose your internal sound card
as the default device.
varies by computer but should
not be set to "USB Audio
Codec, Modem, or Microsoft
Sound Mapper."
10. Under Sound
select USB Audio Codec for
your default device – this is the
USB microphone.
11. Check the box titled Use only
default devices.
12. Click Apply (if possible), then
click OK.
13. Make sure that your computer's
speakers (if not built-in) are
plugged into your computer's audio output and turned on so you can hear
your recording. If your computer has a headphone output, you can use
headphones in-place of speakers.
All manuals and user guides at all-guides.com
and Audio
Playback,
This
Recording,
9