Recording Into The Computer - ION U-CAST Instrucciones De Montaje

RECORDING INTO THE COMPUTER

1. Press the Record Button
2. Speak into the microphone.
3. Turn the VOL control up on the microphone until you are getting a good signal
reading in Audacity. Make sure that you are not reaching the red on the level
meters and "clipping" the signal.
4. You will see the waveform of the audio on the screen as it is recording. You
will hear the audio coming from the output of your computer's soundcard.
No Audio? Go back to the Preferences menu and make sure you have
"Software Playthrough" selected and the speaker volume up on your computer.
See Troubleshooting at the end of this manual for more help.
5. Press Stop
6. SAVE YOUR FILE NOW by clicking on "File"
destination and file name for the project and click "Save."
7.
You have completed the recording process.
All manuals and user guides at all-guides.com
when you have finished recording.
16
"Save Project." Select the