ION U-CAST Instrucciones De Montaje página 7

8. Now select the Playback tab
at the top of the Sound
control panel.
9. Under the Playback tab,
choose the device that you
would like your computer's
audio to come out of.
Your computer's
outputs may appear as:
Speakers – High Definition
Audio Device
or
Headphones –
Definition Audio Device
or both, depending on the
hardware installed in your
computer.
Click on the device that best
matches your desired audio
setup and click Set Default to confirm your selection.
Note: Do NOT choose "Speakers - USB Audio Codec" as your playback
device. USB Audio Codec represents your microphone, and can only be used
as recording input, not a playback output.
10. Click Set Default to confirm your choice.
11. Click Apply if possible, then click OK to close the Control Panel.
12. Click Apply (if possible), then click OK.
13. Make sure that your computer's speakers (if not built-in) are plugged into your
computer's audio output and turned on so you can hear your recording. If your
computer has a headphone output, you can use headphones in-place of
speakers.
All manuals and user guides at all-guides.com
audio
High
7