Hilti SID 14-­A Manual Del Usuario página 12

Model SIW ...
SIW 14­A
SIW 22­A
Torque Setting I
Setting II
Setting III
5 Operation
5.1 Inserting the battery
WARNING
Risk of injury! Inadvertent starting of the impact screwdriver.
▶ Before fitting the battery, check that the cordless impact screwdriver is switched off and that the
forward/reverse switch is in the middle position (i.e. safety lock engaged).
WARNING
Electrical hazards! Risk of short circuiting.
▶ Before inserting the battery, check to ensure that the battery terminals and the contacts in the
impact screwdriver are free from foreign objects.
WARNING
Risk of injury! Hazard presented by a falling battery.
▶ A falling battery may present a risk of injury to yourself and others. Check that the battery is
securely seated in the power tool.
▶ Fit the battery and make sure that it is heard to engage.
5.2 Fitting the belt hook (optional)
WARNING
Risk of injury! Hazard presented by a falling power tool.
▶ A falling power tool may present a risk of injury to yourself and others. Check that the belt hook is
fitted securely before beginning work.
Note
The belt hook allows the power tool to be attached to a belt worn by the operator. The belt hook can
be fitted to allow attachment on the left or right side of the body.
▶ Fit the belt hook.
6
Printed: 27.07.2016 | Doc-Nr: PUB / 5293007 / 000 / 00
SIW 14­A
1/2" square
drive with ball-
notch reten-
tion
59 ftlb
f
(80 Nm)
89 ftlb
f
(120 Nm)
136 ftlb
f
(185 Nm)
2
3
SIW 22­A
3/8" square 1/2" square
drive with drive with ball-
locking ring notch reten-
tion
48 ftlb 66 ftlb
f f
(65 Nm) (90 Nm)
85 ftlb 100 ftlb
f
(115 Nm) (135 Nm)
118 ftlb 148 ftlb
f
(160 Nm) (200 Nm)
3/8" square
drive with
locking ring
55 ftlb
f
(75 Nm)
89 ftlb
f f
(120 Nm)
129 ftlb
f f
(175 Nm)