Intended Use; Charge Status Display; Items Supplied; Technical Data - Hilti SID 14-­A Manual Del Usuario

▶ If the battery is too hot to touch, it may be defective. In this case, place the power tool in a non-flammable
location, well away from flammable materials, where it can be kept under observation and left to cool
down. Contact Hilti Service after the battery has cooled down.
3 Description
3.1 Product overview 1
Hex. socket (SID)
@
Illumination
;
Forward/reverse selector switch with safety
=
lock
Control switch (with electronic speed
%
control)

3.2 Intended use

The product described is a hand-held cordless impact screwdriver. It is designed for driving and removing
screws and for tightening and releasing nuts and bolts in wood, metal, masonry and concrete.
▶ For this product use only Hilti Li­ion batteries of the B14 (SID/SIW 14­A) or, as applicable, the B18 or
B22 (SID/SIW 22­A) series.
▶ Use only the Hilti battery chargers of the C4/36 series for these batteries.

3.3 Charge status display

The charge status of the Li­ion battery is displayed after pressing one of the release buttons lightly (press
only until slight resistance is felt).
Status
4 LEDs light.
3 LEDs light.
2 LEDs light.
1 LED lights.
1 LED blinks.
Note
Battery charge status cannot be displayed while the control switch is pressed and for up to 5 seconds
after releasing the control switch.

3.4 Items supplied

Impact screwdriver/wrench, operating instructions.
Note
To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare
parts, consumables and accessories approved by us for use with the product can be found at your
local Hilti Center or online at: www.hilti.com

4 Technical data

4.1 Impact screwdriver/wrench

Rated voltage
Weight (including battery and chuck)
Rated speed under no
load
4
Printed: 27.07.2016 | Doc-Nr: PUB / 5293007 / 000 / 00
&
(
)
+
§
/
Meaning
•
•
•
•
•
SID 14­A
14.4 V
2.9 lb
(1.3 kg)
Setting I 0 Hz ... 16.7 Hz
(0 /min ... 1,000 /min)
Square drive (SIW)
Torque selector button
Belt hook (optional)
Battery state of charge indicator
Release buttons (B18/B22 battery)
Release button (B14 battery)
Charge status: 75 % to 100 %
Charge status: 50 % to 75 %
Charge status: 25 % to 50 %
Charge status: 10 % to 25 %
Charge status: < 10 %
SIW 14­A
14.4 V
2.9 lb
(1.3 kg)
0 Hz ... 16.7 Hz
(0 /min ... 1,000 /min)