Attaching The Canopy - Home Decorators Collection 51846 Guía De Uso Y Mantenimiento

Assembly - Hanging the Fan (continued)
5
Wiring the fan to the receiver
NOTE: The fan comes with 12 in. lead wires for use with the
provided 4.5 in. ball downrod assembly (D), if you wish to use
longer downrod, you can use the extension lead wire (42 in.)
(AA) provided.
□
If using the 4.5 in. ball downrod assembly (D) provided,
wire the receiver to the fan wires by connecting the molded
adaptor plug from receiver (L) with molded adaptor of the
fan motor assembly (E) together.
□
If you wish to use longer downrod, you can use the
extension lead wire (42 in.) (AA) provided by connecting the
molded adaptor together.
Outlet box
in the ceiling
(NN)
Green
AA
10
6

Attaching the Canopy

□
Align the locking slots of the canopy (B) with the two screws
(FF) and alignment post (EE) in the mounting bracket (A).
□
Push up the canopy (B) and turn clockwise until the
alignment post (EE) engages to the round hole and the
screws (FF) engage to the key slots.
□
Firmly tighten the two mounting screws (FF).
□
Install the decorative bottom cover (C) by aligning the cover
slots with screws in the bottom of the canopy (B). Rotate the
bottom cover (C) clockwise to lock in place.
EE
B
A
FF
C
E