Attaching The Fan Blades - Home Decorators Collection 94469 Guía De Uso Y Mantenimiento

Assembly - Hanging the Fan (continued)
6

Attaching the fan blades

□
Attach blade (G) to blade bracket (J) using the decorative
nuts (CC) and blade attachment screws (AA) provided. Insert
a blade attachment screw (AA) through a hole in the blade
(G) and the blade bracket (J) and into the decorative nut (CC).
Repeat for the two remaining holes in the blade (G).
□
Tighten each screw (AA) securely.
□
Repeat these steps for the remaining blades.
Assembly - Attaching the Accessories
1
Attaching the switch cup adaptor
□
Remove one screw (QQ) from the black bracket below the
fan motor assembly (D). Loosen, but do not remove the
other two screws (RR).
□
Align the key hole slots in the switch cup adaptor (H) with
the two screws (RR) in the black bracket.
□
Turn the switch cup adaptor (H) clockwise until the two
screws (RR) are situated in the narrow end of the keyholes.
□
Re-install the one screw (QQ) that was removed in first
step. Tighten all three screws firmly.
2
Attaching the switch cup
CAUTION: To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
switch cup.
IMPORTANT: It is critical to attach the switch cup using the
quick connector. The fan will not operate unless the switch
cup is connected to the fan.
□
Remove one screw (UU) from the switch cup adaptor (H).
Loosen but do not remove the other two screws (UU).
□
Connect the molded adaptor plug of the receiver (NN) in the
switch cup (E) with the molded adaptor of the fan motor
assembly (D).
□
Aligning the "L" shape holes on the switch cup (E) with the
screws on the switch cup adaptor (H). Turn the switch cup
(E) to hold it in position.
□
Install the other screw (UU) that was removed in the first
step. Tighten all three screws (UU) securely.
G
D
RR
H
QQ
D
11
Please contact 1-800-986-3460 for further assistance.
AA
J
D
CC
H
NN
E
HOMEDEPOT.COM/HOMEDECORATORS
UU