Ce Declaration Of Conformity - GMC GMBL18ID Manual De Instrucciones

Atornillador de impacto sin escobillas 18v
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 34
Technical Abbreviations Key
V
Volts
~, AC
Alternating current
A, mA
Ampere, milli-Amp
Amp hours (battery capacity)
Ah
n0
No load speed
n
Rated speed
Nm
Newton metres (torque)
°
Degrees
Ø
Diameter

CE Declaration of Conformity

The undersigned: Mr Darrell Morris
as authorised by: GMC Tools
Declares that
This declaration has been issued under the sole responsibility of the manufacturer.
The object of the declaration is in conformity with the relevant Union harmonisation Legislation.
Identification code: GMB18ID
Description: 18V Brushless Impact Driver
Conforms to the following directives and standards:
Machinery Directive 2006/42/EC
EMC Directive 2014/30/EU
RoHS Directive 2011/65/EU
EN 60745-1:2009+A11
EN 60745-2-2:2010
EN 55014-1:2006+A1+A2
EN 55014-2:1997+A1+A2
Notified body: TÜV Rheinland
The technical documentation is kept by: GMC Tools
Date: 18/05/2016
Signed:
Mr Darrell Morris
Managing Director
Name and address of the manufacturer:
Powerbox International. Limited. Somerset, BA22 8HZ, UK.
Hz
Hertz
, DC
Direct current
W, kW
Watt, kilowatt
/min or min
-1
Operations per minute
rpm
Revolutions per minute
dB(A)
Decibel sound level (A
weighted)
m/s
2
Metres per second squared
(vibration magnitude)
Specification
Impact Driver
Model number:
GMBL18ID
Technology:
18V, Li-Ion
No load speed:
0 – 2200min
Impact rate:
0-3300min
Max torque:
180Nm
Compatible bits:
1/4" (6.35mm) impact driver hex bits
Dimensions (L x H x W):
170 x 210 x 100mm
Weight:
1.75kg
Battery
Model:
GMC18V40
Cell type:
Li-Ion
Voltage:
18V, DC
Capacity:
4Ah
Batteries supplied will vary depending on pack configuration
Charger
Input power:
230-240V~ 50/60Hz, 80W
Output power:
14.4-18V DC, 3A
Charging time (100%):
80min (4.0Ah), 60min (3.0Ah), 40min (2Ah) & 30min (1.5Ah)
Compatibility:
GMC18V15 (1.5Ah), GMC18V20 (2Ah), GMC18V30 (3Ah)
& GMC18V40 (4Ah)
Cable length:
2m
Ingress protection:
IPX0
Protection class:
As part of our ongoing product development, specifications of GMC products may alter without notice.
*Charging times approximate
Sound and vibration information
Sound pressure LPA:
74.98dB(A)
Sound power LWA:
85.98dB(A)
Uncertainty K:
3dB
Weighted vibration ah:
6.369m/s
Uncertainty K:
1.5m/s²
The sound intensity level for the operator may exceed 85dB(A) and sound protection measures are
necessary.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A) and limit the time of exposure
if necessary. If sound levels are uncomfortable, even with ear protection, stop using the tool immediately and
check the ear protection is correctly fitted and provides the correct level of sound attenuation for the level of
sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness, tingling and
reduced ability to grip. Long-term exposure can lead to a chronic condition. If necessary, limit the length of
time exposed to vibration and use anti-vibration gloves. Do not operate the tool with hands below a normal
comfortable temperature, as vibration will have a greater effect. Use the figures provided in the specification
relating to vibration to calculate the duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according to EN60745 or similar international
standards. The figures represent normal use for the tool in normal working conditions. A poorly maintained,
incorrectly assembled, or misused tool, may produce increased levels of noise and vibration.
www.osha.europa.eu provides information on sound and vibration levels in the workplace that may be useful
to domestic users who use tools for long periods of time.
5
-1
-1
2
GB

Publicidad

Tabla de contenido
loading

Tabla de contenido