Tools Required; Before You Begin - 3M Filtrete Single Stage Guía De Uso Y Cuidado

TOOLS REQUIRED:

(Not included)
Two Adjustable wrenches
#2 Phillips head screwdriver
Drill
Pencil
Safety glasses

BEFORE YOU BEGIN:

• Remove items stored under the sink.
• Have a towel and bowl available in case dripping occurs.
This system uses push-in fittings:
This easy-to-install system uses watertight, push-in fi ttings.
To Attach Tubing:
Push tubing in as far
as it will go. Tubing
must be inserted past
o-ring and hit backstop.
Pull tube to ensure it is secure.
INSTALL FAUCET:
You will need: faucet with attached tubing, nut (C), faucet mounting shim (G), faucet gasket (H), decorative spacer (I), decorative
spacer gasket (J), faucet spout (K)
1. Place the faucet gasket (H), the decorative spacer (I), and the decorative spacer gasket (J) on the faucet and insert faucet tubing,
shaft and nut (C) into pre-existing soap dispenser or sprayer opening in sink. (If no opening exists, or installation is desired else-
where, a 1 1/4" opening must be made.) (Fig. 2)
2. Install faucet mounting shim (G), onto faucet shaft (Fig. 3) and hand tighten nut. (Fig. 4)
3. Insert spout (K) into faucet body (C). Hand tighten faucet spout nut. (Fig. 5)
To Release Tubing:
Push in collet to
release tubing.
With collet held, pull
tubing straight out.
Fig. 1
Faucet Opening
(Fig. 2)
Tighten Nut
(Fig. 4)
4
Insert Shim
(Fig. 3)
Spout Insert
(Fig. 5)