Descargar Imprimir esta página

Imetec TERMOFORO Instrucciones Y Advertencias página 5

Ocultar thumbs Ver también para TERMOFORO:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14
INSTRUCTIONS AND WARNINGS FOR CORRECT AND SAFE USE.
IMPORTANT INSTRUCTIONS.
KEEP THEM FOR FUTURE
REFERENCE.
THEY SUPPLY IMPORTANT INSTRUCTIONS REGARDING
OPERATIONS AND SAFETY DURING PRODUCT
INSTALLATION, USE AND MAINTENANCE.
G E N E R A L
1. After unpacking, make sure that the appliance is intact with no visible signs
of damage caused during transport. Should you have any doubts, do not use
the appliance and take it to an authorised IMETEC Service Centre.
2. Before connecting the appliance, check that the rating plate specifications
correspond to the electrical mains supply. The rating is located on the label
stitched onto the appliance.
3. Do not use adapters, multiple sockets and/or extension cords. If the
appliance's plug and the socket are incompatible, have the socket replaced
with a suitable type by professionally qualified staff.
4. This appliance must be used exclusively as a heating pad as indicated in the
instructions. Any other use is to be considered hazardous.The manufacturer
cannot be held responsible for any damage due to improper or incorrect use.
5. Certain fundamental guidelines must be respected when using any sort of
electrical appliance. Specifically:
- Never touch the appliance with hands or feet that are wet or damp.
- Never pull on the power cord, or the appliance itself, to remove the plug
from the socket.
- Do not leave the appliance exposed to the elements (rain, sun, etc.).
6. Before cleaning or servicing the appliance, disconnect it by removing the
plug from the socket.
7. Should the heating pad or protection fuse break down and/or fail to work
properly, turn off the appliance and do not tamper with it. For any repairs,
C A U T I O N
W A R N I N G S
5
E
N
G
L
I
S
H

Publicidad

loading