Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
MUL-630-V1.0-instr.pdf
C. Button MIN MAX
This button is used to display the maximum and minimum measurements. Press
once to enter the maximum and minimum mode. Press again to display the
maximum and again to display the minimum. To return to normal measurement
mode, press the MIN MAX button again.
D. REL Button
It allows you to set the current measurement reference.
C
The following measurements were made with respect to this.
M
Under measuring function duty cycle and capacitance autoranging mode only it is
Y
available.
CM
The MAX MIN function is not available when measuring capacitance, diode, continui-
MY
ty, duty cycle and temperature. The REL function is not available in measuring diode,
CY
continuity, duty cycle and temperature.
CMY
If you change the measuring range manually after entering the REL or HOLD mode
the meter will exit these modes.
K
Hold down the SELECT key while turning the meter to disable the auto off.
30
29/11/16
0
HOLD
REL
RANGE
FUNC
Hz%
V
16:04
MAX/MIN
uA
Publicidad
Tabla de contenido
