For Your Safety - Kettler TRACK SC Manual De Instrucciones

Tabla de contenido

Publicidad

Assembly Instructions
GB
All KETTLER products are designed in accordance with the latest safety regulations and undergo a constant
process of quality control during manufacturing. The knowledge gained in this process is used to constantly
imporve and develop our products. In order to offer our customers the very best in product quality, we reserve
the right to make technical changes at any time. In spite of this, should you have any cause for complaint,
please contact your KETTLER dealer.

For Your Safety

The running belt should be used only for its intended
purpose, i.e. for physical exercise (walking and
jogging) by one (1) adult persons.
The running belt is not suitable for commercial use.
Any other use of the equipment is prohibited and may
be dangerous. The manufacturer cannnot be held
liable for damage or injury caused by imporper use of
the equipment.
Damaged components may endanger your safety or
reduce the lifetime of the equipment. For this reason,
worn or damaged parts should be replaced
immediately and the equipment taken out of use until
this has been done. Use only original KETTLER spare
parts.
The running belt has been designed in accordance
with the latest standards of safety. Incorrect repairs
and structural modifications (e.g. removal or
replacement of original parts) may endanger the safety
of the user.
The running belt must be set up on firm even ground.
Ensure that the power cable is not pinched and that
no-one can trip over it.
Always ensure that the space under the running
belt is kept free, i.e. that there are no objects, pets
etc. beneath it.
Never touch the moving belt with your hands. Also
ensure that there are no objects close to the belt or the
rollers which could be pulled into it thus causing
injury or damaging the unit itself.
The running belt is not suitable for use by persons
weighing over 120kg.
The unit should be positioned in such a way that there
is a space of 100cm on both side and 200cm behind it.
The unit requires a power supply of 220-230V / 50Hz.
It should be connected only to an earthed safety
socket with a single 16-A fuse. Do not under any
circumstances carry out electrial repairs or
alterations yourself. Always ensure that such
work is done by a proberly qualified electrician.
Do not use a multiple power socket for the running
belt. If an extension cable is being used, ensure that it
complies with the VDE regulations.
When the unit is not in use, unplug it from the power
supply.
Handeling the equipment
Standards:
The machine complies with the DIN EN 957-1/6, class
HC. It is therefore unsuitable for therapeutic use.
Before using the equipment for exercise, check
carefully to ensure that it has been correctly
assembled and checked.
Usage of the equipment in damp rooms is not
permitted. Please ensure that no part of the machine
comes in contact with liquid (drinks, perspiration etc.).
This may cause corrosion.
The running belt is designed for use by adults and
children should not be allowed to play with it. Children
at play behave unpredictalby and dangerous situations
may occur for which the manufacturer cannnot be held
liable. If, in spite of this, children are allowed to use
the equipment, ensure that they are instructed in its
proper use and are supervised accordingly.
To ensure that the safety level is kept to the highest
possible standard, determined by its construction, this
product should be serviced regulary (once a year) by
specialist retailers.
Before carrying out cleaning or maintenance work,
always disconnect the running belt from the power
supply (i.e. pull the plug out of the socket).
Please ensure that liquids or perspiration never
enter the machine or electronics.
Repairs on the electrical components in the unit should
be carried out by qualified persons only.
Always observe the general safety rules and
precautions for working with electrical equipment.
All electric applicances emit electromagnetic radiation
when in operation. Please do not leave especially
radiation-intensive appliances (e.g. mobile telephones)
directly next to the cockpit or the electronic
controlsystem as otherwise values displayed might be
distorted (e.g. pulse measurement).
Prior to training attach the cord of the running belt
stop trip to your clothing.
The KETTLER treadmill has an emergenty stop
mechanism for your safety. Before starting your
workout, fasten the cord of the safety key to your
clothing. If the treadmill has been shut down by
removing the safety key, restart it by reinserting
the key. An automatic restart of the treadmill belt
does not occur. Further instructions concerning the
handleing fo the safty cut-out can be found in the
operating instrucitons for the training computer.
An unmonitered use of the treadmill by other people
can be prevented by removing the safety key and
keeping it safely hidden.
In case of any emergency, hold on tightly to the
handrail with both hands and leave the treadmill by
means of the antislipping surface of the lateral
platofrm. Activate the emergence stop mechanism
(safety cut-out).
Any interface with parts of the product that are not
described within the manual may cause damage,
or endanger the person using this machine.
Extensive repairs must only be carried out by
KETTLER service staff or qualified personnel
trained by KETTLER.
Should you be in any doubt, please consult your
dealer.
Always wear suitable shoes (running shoes) when
using the running belt.
Before beginning your first training session, familiarize
yourself throughly with all the functions and settings of
the unit.
If the equipment is in regular use, check all its
components throughly at appropriate intervals. Pay
particular attention to the tightness of bolts and nuts.
In case of a regular use of the running belt, the cold
running belt has to be serviced with silicone oil.
Depending on the degree of use and load to which the
unit is subjected, the belt may tend to stretch or slip.
Tighten the belt as described. Adjust the tightness of
the belt as describe in section „handeling".
Observer the movement of the edge of the belt when it
is in use. If it tends to run towards the side, readjust it
accordingly.
5

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

7885-500

Tabla de contenido