Introduction; Safety; Main Components - Skymsen MPL Manual De Instrucciones

1. Introduction

1.1Safety

When misused, the Mini Band Saws model MPL can be potentially
DANGEROUS. Maintenance, cleaning or any other service on this machine must
be made only by properly trained technicians and the power plug must always be
disconnected. For your safety, read the following instructions in order to avoid
accidents:
1.1.1 Unplug the machine when you need to remove any removable part
during cleaning, maintenance or any other operation.
1.1.2 Never make use of any tool or instrument that is not originally part of
the machine during any operation.
1.1.3 Never touch the blade #º. 06 (Pic.01), even when the machine is off,
because it has sharp edges.
1.1.4 Never adjust the Thickness Guide #º.12 (Pic.01) with the blade in
movement.
1.1.5 Never use water jets directly upon the machine.
1.1.6 Never use clothes with wide sleeves, especially on the wrists during
the operation.
1.1.7 Use steel gloves during the cut operation.
1.1.8 Keep your hands away from movable parts.
1.1.9 Never turn the machine on with the doors opened.
1.1.10 Never switch ON the saw with wet clothes or shoes
1.1.11 When setting the machine, connect the ground wire.
This equipment is not to be used by persons (including children) with any
physical or mental inabilities, or without operation experience and
knowledge, which can only be acquired by means of instruction and
supervision of a security staff.
If the Cord is not in good conditions of use, to avoid accidents
it must be replaced by the supplier, an authorized technician or
someone qualified for the service

1.2 Main Components

All components of this machine have been made of raw materials carefully
selected for each function, according to the test patterns and Siemsen experience.
IMPORTANT
IMPORTANT
02