RDI transform Instrucciones De Instalación página 13

Read all instructions prior to installing product.
Refer to local building codes for installation requirements; failure to install this product in
accordance with building codes may affect safety of the product and void product warranty.
Refer to manufacturers safety instructions when operating any tools.
CABLE RAIL | STAIR APPLICATION
Warning: Always wear safety goggles.
Transform Cable Rail MUST be installed on 4" x 4" wooden posts sleeved with
Transform post sleeves to support cable tension!
It is RECOMMENDED to install Cable Stair Rail with the Transform bottom beam.
If NOT using bottom beam, it is important to note that your installation will vary
depending on placement of posts, stair rise and run, stair angle, and bottom space.
WITH BOTTOM RAIL
Continue to page 14 for step-by-step instructions on how to install
you cable rail on a stair using the bottom Transform rail.
WITH NO BOTTOM RAIL
Skip to page 23 for tips and tricks on how to install your cable rail
without the bottom rail.
13