RDI transform Instrucciones De Instalación página 28

13.
Position the top beam (with attached mid-
baluster support) between posts to ensure
proper alignment (Fig. 18). Pre-drill the post
for the center bracket screw using a 1/
bit. Secure the brackets to the post using
3 mounting screws (component K) in each
bracket, beginning with the center screw hole
(Fig. 19).
28
14.
Secure the mid-baluster support to your deck
surface using #8 x 1.5" screws (component T)
(Fig. 20).
" drill
8
(Fig. 18)
(Fig. 19)
(Fig.20)