General Safety Information - CASO DESIGN CM1000 Manual Del Usuario

Microondas comercial
Ocultar thumbs Ver también para CM1000:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 96
Warning
Danger due to unintended use!
Dangers can emanate from the device if it is used for an unintended use and/or a different
kind of use.
Use the device exclusively for its intended use.
Observe the procedural methods described in this Operating Manual.
Claims of all kinds due to damages resulting from unintended uses are excluded.
The User bears the sole risk.

12.2 General Safety information

Please observe the following general safety notices with regard to the safe handling
of the device.
Examine the device for any visible external damages prior to using it. Never put a
damaged device into operation.
If the connection lead is damaged, you will need to have a new connection lead
installed by an authorized electrician.
Persons, who are not able to operate the device because of any physical, mental or
motor disabilities may only use the device under the supervision or under the
instructions of a responsible person.
Do not permit children to use the device, unless they are supervised.
Do not leave the device unsupervised when it is in operation.
Do not operate the oven if it is empty. This could damage the device.
The device is not intended for drying, warming up or heating up living animals.
Food thermometers are unsuitable to be used when the microwave is in operation.
Do not use the cooking chamber for storage purposes. Do not leave any paper
products, cooking utensils or foodstuffs in the cooking chamber when the oven is not
being used.
Only qualified electricians, who have been trained by the manufacturer, may carry
out any repairs that may be needed. Improperly performed repairs can cause
considerable dangers for the user.
Only customer service departments authorized by the manufacturer may carry out
repairs on the device during the guarantee period, as otherwise the guarantee
entitlements will be null and void in the event of any subsequent damages.
Defective components must always be replaced with original replacement parts. Only
such parts will guarantee that the safety requirements are fulfilled.
caso CM1000
Please note
34

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido