Finishing The Installation - Progress Lighting AIRPRO P2582 Manual De Instalación

SUPPLY CIRCUIT
BLACK
WHITE
BLACK
BLUE
WHITE
BLACK
BLUE
Figure 13
7.

Finishing the Installation

Step 1. Tuck connections neatly into ceiling outlet
box.
Ground
Conductor
Step 2. Slide the canopy up to mounting bracket and
Outlet Box
place the key hole on the canopy over the screw on
the mounting bracket, turn canopy until it locks in
Green
place at the narrow section of the key holes. (Fig.
Ground
Lead 14)
Ground to
Downrod
Step 3. Align the circular hole on canopy with the
remaining hole on the mounting bracket, secure by
tightening the two set screws. Note: Adjust the
canopy screws as necessary until the canopy and
canopy cover are snug.
Make sure the notch on the hanging bracket properly
sits in the groove in the hanger ball before attaching
the canopy to the bracket by turning the housing until
WHITE
WHITE
WARNING
it drops into place.
Outlet box
Hanger
bracket
Canopy
cover
Figure 14
Screws
Canopy