Change Of Hinge Side; Has The Appliance Stopped Working - Vestfrost FKG 410 Instrucciones Para El Uso

GB
Change of hinge side - from right to left
See page C
1. The top-hat is dismounted. See fig. 1.
2. The top hinge is dismounted. See fig. 2.
Hold on to the hinge as it is spring-loaded
and therefore will turn when the screws
are removed.
3. The door is lifted off and the spring in the
hinge hole is dis mounted.
4. The new spring is mounted. See fig.3.
The spring must be thrown into mesh
with the spring holder in the aluminium
strip and be locked. The bush and the
pivot are mounted.
5. The bottom hinge is moved to the left
side. See fig. 4.
6. The door is mounted (see fig. 5) and
the top hinge is mounted as shown
and turned 180° counter-clockwise and
fastened.

Has the appliance stopped working?

Before calling a repairman, check that
● The plug is properly plugged into the wall
socket.
● The fuse is intact.
● The power has not been cut off.
● All controls are correctly set.
● Switch off the cabinet for 15 minutes (for
instance at the thermostat). Switch it on
again and after 5 minutes check whether
frost has formed on the evaporator.
● Do not open the cabinet unnecessaryly.
6