Troubleshooting - Krups KB790 Manual De Instrucciones

English
CAUTION:
HANDLING BLADE ASSEMBLY. BLADES ARE
EXTREMELY SHARP!!
Wash the locking ring base, blade assembly, and seal carefully by hand
■
with warm water and gentle dishwashing liquid, then dry before
re-assembling to the blender jar.

TROUBLESHOOTING

Problem:
Blender does
work.
Excessive vibration
Blender jar contents
leaking from lid.
11
USE EXTREME
Cause:
Blender is unplugged Plug in the blender
not
The blender jar is not
properly assembled or
positioned on the base
The blender is placed
on an uneven surface. Place on a flat surface.
The blender jar is not
properly positioned on
the base.
Maximum capacity ex-
ceeded
Blender lid is not pro-
perly locked in place.
CAUTION WHEN
Solution:
Confirm that the blade
assembly is properly
assembled to the blen-
der jar, and that the jar
is correctly positioned
in the base.
Confirm that the jar is
correctly assembled
and positioned in the
base.
Note maximum levels
as follows
- 60 oz for thick mix-
tures
- 50 oz for very liquid
mixtures
- 6 to 8 ice cubes for
ice crush
Lock the blender lid in
place before blending.