Installing + Activating The Serene Station - BabyCargo PLUSH + PLAY Manual De Instrucciones

SECTION I
INSTALLING AND ACTIVATING THE SERENE STATION
• The Serene Station requires three (3) AAA alkaline batteries for
normal operation. (Batteries not included.)
• Place the Serene Station face down on a firm surface. Using a Phillips
screwdriver, remove screws and battery cover.
• Install the batteries as designated in the housing, matching the +/-
embossed markings with the corresponding heads of each battery.
• Replace the battery cover and screws, taking care not to cross-thread
or over-tighten the screws.
• Mount the Serene Station on the Playard rail, situating it so the
BabyCargo logo faces the inside of the Playard.
• To activate the Serene Station, press the setting buttons to activate
soothing music, lighting, or vibration.
+
1.5V
-
3x AA/LR6
+
1.5V
-
3x AA/LR6
BABY CARGO PLUSH + PLAY
3x
INSTRUCTION MANUAL
+
1.5V
-
3x AA/LR6
20
+
1.5V
-
AA/LR6