Mp3 & Mpeg Function - Lenco DVD-517H Manual De Instrucciones

Mp3 & MPEG
FUNCTION
When an MPEG and an Mp3 disc is loaded, the screen will display as follows:
Current
directory
name
The playing file
is an Mp3 audio
file.
Current
directory
name
The playing file
is an Mp3 audio
file.
Press to select the file when the cursor appears in the file window.Press
ENTER to play the current file select by the cursor.
Press to switch between the directory window and the file window.
Note:
During Mp3 playback, Forward Scan and Reverse Scan are not available.
Note:
The player will not identify or play a MP3 disc under the following conditions: the
recording format is not supported(make sure the files are in MP3 format),the disc is
badly scratched, damaged or dirty, the disc is not finalized.
Current MP3/JPEG file
name. If a JPEG file is
playing, the name should
have a JPEG extension.
File Switch Region: Displays
the file type of the playing
and the switching.
The playing file is
a JPEG picture file.
Current MP3 file name.
If a JPEG file is playing,
the name should have a
JPEG extension.
File Switch Region: Displays
the file type of the playing
and the switching.
The playing file is
a JPEG picture file.
27