Data Exchange - TrekStor DataStation maxi Xpress Manual De Instrucciones

1) Connecting the DataStation
a) Connect the USB 3.0 port of your DataStation with a USB 3.0 port of
your computer. Please use only the provided USB 3.0 cable.
Thanks to the downward compatibility of USB 3.0 you can also connect
i
your DataStation to a USB 2.0 or USB 1.1 port of your computer. In this case,
you will not be able to benefit from the higher data transfer rate that you
can get when you connect the DataStation via USB 3.0. When connecting
via an older USB standard, please also use the provided USB 3.0 cable.
b) Next, connect the power supply to the "P
DataStation. After connecting to the DataStation, you can connect the
power supply to the mains socket.
c) Switch on the DataStation usind the power switch
of the device. Your operating system automatically recognizes the
DataStation and adds the DataStation as a "l
to "m c
y omPuter
and Linux®).
If you want to disconnect your DataStation from your computer, first log
a
off, as described in these instructions, to safely remove the drive and prevent
data loss. After logging off, you can switch off your DataStation by using the
power button

2) Data exchange

After a successful startup of the device, a local disk "t
"m "/"c
y comPuter omPuter
Windows® 7/Vista™/XP
• Select the desired files or folders with your mouse.
• Position the mouse pointer over the selected files or folders, and press
the right mouse button. Select "c
appears.
• Under "m
y comPuter
"t S " drive).
rek tor
• Click it with your right mouse button, and select "P
After copying is completed, the data will be available on the target drive.
Mac® OS X from 10.3
Select the desired files with your mouse. Drag and drop the files in the
"F " to the drive symbol of your DataStation.
inDer
3) Logging off and disconnecting the TrekStor DataStation
from the computer
Windows® 7/Vista™/XP
At the bottom right on the task bar, left-click on the icon "S
H ". In the context menu that appears, left-click on "S
ArDwAre
m S D
ASS torAge evice
the operating system of your computer. You can now disconnect the
DataStation from your computer.
"/"c " (Microsoft® Windows) or "D
omPuter
.
u
" (Windows®) or on your "D
"/"c ", select the desired target (such as the
omPuter
- D " to select it. This removes the DataStation from
rive
" connector of the
ower
D
ocAl
rek
eSktoP
" from the context menu that
oPy
on the back
u
" (or "l D
iSk ocAl rive
" (Mac® OS X
eSktoP
S " appears under
tor
" (Mac® OS X).
" to start copying.
ASte
r
AFely emove
r
AFely emove
11
")
EN