Kohler K-647 Guia De Instalacion página 4

Remote Valve
Inlet Hose
Sink
2. Install the Remote Valve
NOTE: The remote valve must be located within 12" (30.5 cm) of the
spout.
Slide the O-ring over the supply hoses onto the base of the
remote valve.
Insert the remote valve through the hole in the mounting surface.
Assemble the bracket and nut to the stud from underneath the
mounting surface.
Align the handle and securely tighten the nut.
1048033-2-B
Handle
Stud
Supply Hoses
O-Ring
Bracket
Nut
4 Kohler Co.