Publicidad
Idiomas disponibles
Idiomas disponibles
In the event of a breakdown or poor operation, turn the appliance off and have
it checked by professionally qualified personnel; repairs carried out by
unauthorised personnel may be dangerous and invalidate the guarantee.
ASSEMBLY
Attention:always unplug the appliance before you assemble to the fan.
Attention: the fan can only be used if complete with the support base.
For assembly refer to the diagrams: first
place the front shell (D) on the body, then
the rear shell (C) and secure them with the
hooks provided. Use the 4 screws (B)
provided. Insert the electrical cable through
the guide (A) in the rear shell. After this has
been done, check that the two shells are
firmly and correctly assembled.
Control panel
1.
On/off button
2.
Speed button
3.
Mode button: normal, natural, sleep
4.
Swing functionbutton
5.
Timer button
USE
Remote control
1.
On/off button
2.
Speed button
3.
Mode button: normal, natural, sleep
4.
Swing functionbutton
5.
Timerbutton
15/48
Publicidad
