Maintenance And Service; Maintenance And Cleaning; After-Sales Service And Application Service - Bosch GLM 100 C Professional Manual Original

OBJ_BUCH-2166-001.book Page 18 Wednesday, March 5, 2014 2:16 PM
18 | English
Cause Corrective Measure
Bluetooth® cannot be activated
The battery is too low. Charge the measuring tool's
battery.
No Bluetooth® connection
Failure of the Bluetooth®
Check the application on your
connection mobile terminal/device.
Check if Bluetooth® is activat-
ed on your measuring tool and
mobile terminal/device.
Check your mobile terminal/
device for overload.
Reduce the distance between
measuring tool and your mo-
bile terminal/device.
Avoid obstructions (e.g., rein-
forced concrete, metal doors)
between measuring tool and
your mobile terminal/device.
Observe clearance to electro-
magnetic disturbances (e.g.,
WLAN transmitters).
Data transmission via USB interface not possible
Software error Make sure that the software
runs correctly on your com-
puter or notebook. For further
information, please refer to
the Bosch website at
www.bosch-pt.de
Micro USB cable Check the proper and tight
seating of the micro USB ca-
ble.
Check the micro USB cable for
damage.
Battery charge-control indicator (g) or prolonged charge
duration indication n on the display
Charge duration clearly too Use only a charger from the
long, as charging current too Bosch accessory range.
low.
Measuring result not plausible
The target surface does not Cover off the target surface
reflect correctly (e.g. water,
glass).
The laser beam outlet 18 or Make sure that the laser beam
the reception lens 17 are outlet 18 or the reception lens
covered. 17 are unobstructed
Wrong reference level set Select reference level that
corresponds to measurement
Obstruction in path of laser Laser point must be com-
beam pletely on target surface.
2 609 141 158 | (5.3.14)
Cause Corrective Measure
The indication remains unchanged or the measuring tool
reacts unexpectedly after pressing a button
Software error Press the measuring button 2
and the button for clearing the
internal memory / On/Off 4 to
reset the software.
The measuring tool monitors the correct
function for each measurement. When a de-
fect is determined, only the symbol shown
aside flashes in the display. In this case, or
when the above mentioned corrective
measures cannot correct an error, have the
measuring tool checked by an after-sales service agent for
Bosch power tools.

Maintenance and Service

Maintenance and Cleaning

Store and transport the measuring tool only in the supplied
protective pouch.
Keep the measuring tool clean at all times.
Do not immerse the measuring tool in water or other fluids.
Wipe off debris using a moist and soft cloth. Do not use any
cleaning agents or solvents.
Maintain the reception lens 17 in particular, with the same
care as required for eye glasses or the lens of a camera.
In case of repairs, send in the measuring tool packed in its
protective pouch 26.

After-sales Service and Application Service

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the measuring tool.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0844) 7360109
E-Mail: boschservicecentre@bosch.com
Bosch Power Tools