Configuring A Remote Internet Camera; Quick Operation; Switching On/Off And Rebooting - Velleman AVTECH NVR2 Guía Rápida

1. Select STATIC in NETWORK TYPE, and change the IP address to 10.1.1.xx (xx ranges from 11 ~ 253).
2. Click APPLY and EXIT to save your changes.
3. Wait until the NVR detects the IP camera and displays images.
9.3

Configuring a remote internet camera

Via internet you can record video images from an IP camera in a remote location.
1. Make sure that the IP camera is accessible outside its LAN network via a dynamic domain name (for
example ip_office.ddns.eagleeyes.tw).
2. In the main menu [19], click
3. To assign a channel to a remote IP camera, click URI to enter the address of the camera and its port
number.
4. Click SETUP to enter the access information of the camera.
5. Enter the user name (USER NAME) and password (PASSWORD) to access the IP camera.
6. Click GET TYPE to detect the camera and make sure the access information is correct.
7. Select the image size (IMAGE SIZE), image quality (QUALITY), and images per second (I.P.S.).
Note: The available options depend on the camera you want to connect.
8. Click GET TYPE to detect the camera and make sure the access information is correct.
9. Optional: for a camera with audio recording, set AUDIO to ON or OFF.
10.

Quick Operation

10.1 Switching on/off and Rebooting

To power off or reboot the NVR:
 In the quick operation panel [18], click
V. 01 – 04/03/2013
NVR2
(ADVANCED CONFIG) and select CONNECTION.
and then click
8
(power off) or (reboot).
©Velleman nv