Beurer MP 41 Instrucciones Para El Uso página 11

– This device is not intended for use by persons (including children) with
restricted physical, sensory or mental capabilities and/or by persons
lacking the required understanding of the equipment and how it is used,
unless they are supervised by a person who is responsible for their safety
or they are given instructions on how to use the device.
– Children should be supervised to ensure that they do not use the device
as a toy.
2. Preparation
This manicure and pedicure instrument is equipped with high-quality at-
tachments. The basic version includes 7 attachments with long-life sapphire
coating or polishing felt.
Together with the 2-level speed control and clockwise/anticlockwise ope-
ration, this ensures a professional pedicure and manicure that would other-
wise only be possible at a podiatrist.
The integrated LED light additionally creates ideal light conditions during
application.
3. Application
3.1 General
– This instrument is intended only for the treatment of hands (manicure)
and feet (pedicure).
– Select an attachment and push it onto the instrument spindle using a
slight pressure. To remove: pull the attachment and instrument apart in
the axial direction (straight).
– Switch the device on by moving the slide switch down (anticlockwise,
LED red) or up (clockwise, LED green).
– All file and cutting attachments are coated with a sapphire grain.
This guarantees extremely long life and almost guarantees freedom from
wear.
– You can select one of two speed settings (Hi and Lo). Press the corre-
sponding button on the device
– Do not exert heavy pressure and always guide the attachments carefully
over the surface to be treated.
– Move the instrument under light pressure in circular movements slowly
over the parts to be treated.
– Note that the cutting attachments will have a reduced effect if the skin is
softened or moist. For this reason, do not carry out any pretreatment in a
bath.
11