Optional Cable Connections; Ac Power Supply Cord; Cable / Antenna Connection - Panasonic CT-27SX11 Instrucciones De Operación

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

I
NSTALLATION

Optional Cable Connections

Shielded audio and video cables should be used between components. For best
results:
r
r
r

AC Power Supply Cord

CAUTION:
BLADE OF PLUG TO WIDE SLOT OF AC OUTLET AND FULLY
INSERT. DO NOT USE A PLUG WITH A RECEPTACLE OR OTHER
OUTLET UNLESS THE BLADE CAN BE FULLY INSERTED TO
PREVENT BLADE EXPOSURE.
PROTECT POWER CORDS FROM BEING WALKED ON, ROLLED OVER,
CRIMPED, BENT OR PINCHED, PARTICULARLY AT PLUGS, CONVENIENCE
RECEPTACLES, AND THE POINT WHERE THEY EXIT FROM THE APPARATUS.

Cable / Antenna Connection

For proper reception, either a cable or antenna connection is required.
Cable Connection
Connect the cable supplied by your local cable company.
Note:
Antenna Connections
r
r
6
Use 75-ohm coaxial shielded cables.
Use appropriate input and output connectors, that match your component connectors.
Avoid long cables to minimize interference.
TO PREVENT ELECTRIC SHOCK MATCH WIDE
A cable converter box may be required for proper reception.
Check with your local cable company for compatibility
requirements.
For proper reception of VHF/UHF channels, an external antenna is required. For best
reception an outdoor antenna is recommended.
Antenna Mode must be set to TV.
Cable Preset
Cable Mode is preset at the factory. Antenna
users must change to Antenna Mode in the
Setup Menu.
Polarized plug
Incoming Cable from
Cable Company
75 Ohm VHF/UHF
on back of TV
Incoming Cable from
Home Antenna

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido