Publicidad
•
Leave the appliance cooled completely before you clean it.
•
Never put the appliance, the plug or the cord into water or other liquids.
•
Never use the appliance if it is malfunctioning or damaged. Leave it to an authorized dealer to examine or repair.
Inappropriately implemented repairs can have dangerous consequences.
•
Store this instruction up and make them also available for different users of the equipment accessible.
•
This appliance is appropriate exclusively for the use in the household and not for the use under commercial
conditions.
•
Make sure the appliance never comes into contact with flammable materials, such as curtains, cloth etc. when it
is in use, as a fire might occur.
•
Keep Packing material, e.g. polybags out of childrens reach.
Before using it
Take the appliance out from the packing and use a suitable plug socket.
o
When it is first switched on, the appliance may smell and emit some smoke. This is normal. We therefore
o
recommend that you heat up the appliance for about 4 minutes without any food.
Always pre-heat your appliance on the highest level during more or less 10 minutes before using it.
o
Application
The heating plate should be rubbed in with some food oil.
Put the power supply plug into the plug socket and switch you on the appliance. After approximately 10 minutes
the heating plate achieved the correct temperature.
Give a small quantity of the prepared paste on the heating plate and distribute these evenly with the help of the
paste distributor. Rub the edge of the baking surface occasionally with a moistened cloth then the Crepes can
be inferred after baking more easily.
After about 45 seconds use the wood spatula to turn the crepe. The correct baking time depends on the dough
mixture and the desired browning of the Crepes.
Note: Never use metal articles for distributing the paste and/or for turning or taking the Crepes, since it could come to
a damage of the non-adhesive coating of the heating plate.
Put the finished Crepe on a plate. Now you can enjoy it.
Cleaning
Before cleaning, unplug and wait for the appliance to cool down.
Wipe the inside and the edges of the appliance with a paper towel or a soft cloth.
Do not immerse in water or any other liquid.
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a
similarly qualified person in order to avoid a hazard.
*****
Publicidad
