Tecnical Data - PLYMOVENT ECONOMY ARM Instrucciones Para El Uso

ball-bearing hose extraction arm
EA
ball-bearing jointed
extraction arm
the Plymovent ball-bearing extraction arm - EA - is a flexible and ef-
ficient extractor for dust, welding fumes, oilmist, fumes from solvents etc.
ideal for many problem areas. the lower spring-assisted joint supported
in a double ball-bearing mount, gives EA a smooth, flexible movement.
the EA reaches above its mounting height and is manoeuvrable through
360°.
Advantages
• Easy to move thanks to the ball-bearing mountings and
spring assistanse.
• Reaches up to 6m / 6' with stanction PA-220.
• Rugged construction.
• Easy-to-reach ring handle ensures simple positioning of
the hood.
• Standard stanction for ceiling, floor and wall mounting
makes installation easy.

tecnical data

EA-2
EA-3
EA-4
Components and operation
E
A
D
B
A. ball-bearing mounting bracket
complete with Ø160 mm inlet sigiot.
b. inner arm pivot with friction pad tensioning
adjustment.
C. flame resistant hose made from PvC coated woven polyamide
with internal steen spiral.
d. Steel inner arm.
E. tensioned support spring.
f. internally adjustable elbow joint.
G. Steel outer arm.
h. Universal joint with hood collar and shut-off damper.
i. hood, constructed from sheet steel, includes safety and quick-fit coupling.
hood opening Ø300 mm / 11,8". 360° ring handle Ø300mm / 11,8"
Nb: the hood can be turned 110° in all directions.
0000101886/011013/A EA/H
Standard model for
wall and stanction
mounting. 2m/7',
3m/10' and 4m/10'
reach,
mounting bracket
included.
C H
I
G
F
© Copyright 2008: All rights reserved. All information within this printed matter may not be reproduced,
handed over, copied, xeroxed or translated into another language in any form or means without written
permission from PlymoVent AB. PlymoVent AB reserves the right to make design changes.
Delivery
the extraction arm is delivered complete with wall mounting
bracket on whitch the fan can be directly fitted.
A Ø 160mm / 6,25" spigot for connection to a central duct-
work system is also provided.
Modell Max.
No. working
Radius
EA-2-S
2,0m / 7'
EA-3-S
3,0m / 10'
EA-4-S
4,0m / 13'
Handling
1. 360° ring handle for positioning of the hood.
Can be reached from all sides.
2. ratchet control knob.
3. Quick-fit catch for simple exchange of extension hose
and hood.
4. Switch for light cartidge ( se accessories
hl-20/24-160).
5. Switch for manual start/stop of fan or damper
(se accessories SA-24, ES-90 or iCE-lC).
Hood operation
the black, enamelled metal hood can be
angled 110° forwards, backwards and
to the sides. large, 360°, ring handle,
Ø300 mm / 11,8".
replace:
Hose
Recomended
diameter airflow
mm
160mm /6,25" 800–1200 m /h / 470-705cfm
3
160mm /6,25" 800–1200 m /h / 470-705cfm
3
160mm /6,25" 800–1200 m /h / 470-705cfm
3
EA/ENG/2/11
EN - 2