Installation Preparation; Tools You Will Need - Monogram WD35X20417 Instrucciones De Instalación

PARTS SUPPLIED IN
INSTALLATION PACKAGE:
• Junction box cover and #10 hex-head screw
• Hose clamp
• Drain hose (approximately 58" long)
• Drain hose hanger
• 2 #8-18 hex head screws to secure brackets to
washer tub frame
• 1 top trim piece
• 2 side trim pieces
• 2 mounting brackets for wood countertops
or side cabinets
• 2 #8-18 x 5/8" Phillips special head screws,
to secure dishwasher to underside of
countertop or to side cabinets
• Plug buttons
• Literature, samples and/or coupons
MATERIALS YOU WILL NEED:
• 90° elbow (3/4"hose internal thread on one
end,opposite end sized to fit water supply)
• UL-listed wire nuts (3)
• Masking Tape
Materials For New Installations Only:
• Air gap for drain hose, if required
• Waste tee for house plumbing, if applicable
• Electrical cable or Power Cord Kit WX09X70910 (5.4 Ft)
or WX09X70911 (7.9 ft) depending on your installation.
• Screw-type hose clamps
• Strain relief for electrical connection
• Hand shut-off valve (recommended)
• Hot Water Line–3/8" minimum, copper tubing
(including ferrule, compression nut) or GE Appliances
Part # WX28X326, flexible braided hose.
• WD24X10065 drain hose (12' long), if needed.

TOOLS YOU WILL NEED:

• Phillips-head screwdriver
• 1/4" and 5/16" nutdriver
• 6" Adjustable wrench
• Level
• Carpenter's square
• Measuring tape
• Safety glasses
• Flashlight
• Bucket to catch water when flushing the line
• 15/16" socket (optional for skid removal)
• Gloves
• Pliers
For New Installations Only:
• Tubing cutter
• Drill and appropriate bits
• Hole saw set

Installation Preparation

Junction
Box Cover
Mounting
Brackets
Strain Relief
Phillips-Head
Screwdriver
15/16" Socket
Flashlight
Safety Glasses
3
#10 Hose Clamp
Hex-Head
Junction
Box Screw
1/2" long
Drain Hose Hanger
Top Trim Piece
#8 Phillips
Special
Head Screws
5/8" long
Wire Nuts (3)
90°Elbow
Electrical Cable
(or Power Cord,
Waste Tee
if applicable)
Air Gap
Hot Water Line
Hand
Shut-Off
Valve
1/4" and 5/16"
Nutdriver
Pliers
Measuring Tape
6" Adjustable
Wrench
Drill and Bits
Hole Saw Set
Drain Hose
#8 Hex-Head
Mounting Bracket
Screws
Side Trim Pieces
Plug Buttons
Literature
Coupler for
Masking Tape
optional
drain hose
Hose Clamps
Optional
12' Drain Hose
WD24X10065
Level
Carpenter's
Square
Tubing Cutter
Gloves
Bucket