BEBE CONFORT MiloFix Manual Del Usuario página 41

restraint device should be positioned and
installed in such a way that they cannot, when
the vehicle is being used under normal
conditions, become trapped under a moving seat
or in the vehicle door.
• N ever modify the construction or the materials
of the car seat and the seat belt without
consulting the manufacturer.
• D o not use the child restraint device without the
cover. Do not replace the seat cover with a cover
other than that recommended by the
manufacturer, because it will have a direct effect
on the functioning of the child restraint.
• T his child restraint is effective only if the
instructions for use are respected.
• A lways fasten the child restraint even when the
child is not sitting in it.
• N ever place heavy objects on the rear parcel
shelf, to avoid the danger of projectiles in the
event of an accident.
• A lways check that no part of the seat or the
harness is trapped under a seat or in the vehicle
door.
• F olding seats must always be locked in place.
• A fter purchasing, install the seat in your vehicle.
If you encounter any installation problems due
to the length of the vehicle seat belt, contact
your distributor immediately.
• I f in any doubt about the correct installation or
use of the system, the user is advised to contact
the distributor or the manufacturer of the child
restraining device system.
Care
Fabric:
• B efore cleaning check the label sewn into the
fabric, you will find the wash symbols
indicating the method of washing each item.
Washing symbols :
Shoulder pads:
• A fter safety reasons, shoulder pads are not
removable. Clean it by using a damp cloth.
Shell:
• C lean the shell using a damp cloth.
Environment
Keep plastic covering away from children to avoid
suffocation.
For environmental reasons, when you have
stopped using this product, we ask that you
dispose of the product in the proper waste
facilities in accordance with local legislation.
Questions
Please contact your local Bébéconfort distributor
or visit our website, www.bebeconfort.com
When doing so please have the following
information to hand:
EN
43