Tools And Materials; Before You Begin - KALLISTA P31021-00 Guia De Instalacion

Thank You For Choosing Kallista
We appreciate your commitment to Kallista quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don't
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kallista.

Tools and Materials

Electrical
Tape

Before You Begin

DANGER: Risk of personal injury. To avoid possible electrical
shock, the electricity must be turned off at the circuit breaker or
fuse box before attempting any installation procedure.
DANGER: Risk of personal injury. To avoid possible electrical
shock, the outlet box must be properly grounded.
WARNING: Risk of property damage. To avoid possible risk of
fire, this fixture has been rated for bulbs up to 60-watts. Do not
exceed this rating.
Observe all local electrical codes and building codes.
Carefully inspect the fixture for damage.
It is strongly recommended that a professional electrician install
the fixture.
It is recommended that the mounting plate for the wall sconce be
located onto a wall stud.
This fixture is for indoor use only.
Kallista reserves the right to make revisions in the design of
products without notice, as specified in the Price Book.
1008343-2-A
Blade Light Bulb
Screwdriver
2 Kallista