Bissell PROHEAT 1846 Serie Guia Del Usuario página 13

Maintenance: Machine Care
A few simple steps can assure your machine is well maintained after your cleaning is complete.
1
Turn power OFF and
unplug the machine.
Always wrap the power
cord and make sure the
hose is securely wrapped.
Maintenance: Belt Replacement
1
Brush Belt
Insert a Flat Head Screwdriver to
remove the belt access door. (There
is a slot at the end of the door.) Pull
the Belt Access Door up and out.
3
2
The final empty of the 2-in-1
tank should always get an
extra rinse-out. Rinse under
and around the bladder as
well as the lint screen.
Pump Belt
Pictured here is the
Pump Belt. If broken,
gently remove the belt.
To re-install a new Pump
Belt, loop one end of the
new belt around the red
pump pulley and then
stretch it to the silver
motor shaft.
LINT
SCREEN
2
To return the Belt Access Door, line
4
it up with the slots in the machine.
The door will slide into place and
snap shut.
3
Using the Nozzle Clean
Out Tool, any excess
debris or pet hair can be
removed from the nozzle
and brushed out of the
brush rolls.
Turn the machine to
lay on its side so the
belt access area is
facing upward. Use a
Philips screwdriver to
remove the screws on
the arms that hold the
brush in place. If the
Brush Belt is broken,
gently remove the
belt. To re-install a new
belt, first place the belt
around the pulley and
then stretch it to wrap
around the brush gear.
www.BISSELL.com
13