Bissell PROHEAT 1846 Serie Guia Del Usuario página 8

Before You Clean: Prepare Your Machine
Fill the 2-in-1 Tank with Water
1
1
2
3
5
NOTE: Heatwave Technology™
helps maintain the temperature
of the water in your 2-in-1 tank
while you're cleaning.
8
www.BISSELL.com
4
6
2
1-Press the recline pedal to access
the 2-in-1 tank. Remove the tank
from the base of the machine by
lifting the tank carry handle.
2-Carry the tank like a bucket to
the sink. Rotate the carry han-
dle forward to unlatch the lid.
Remove the lid and turn it over to
locate the measuring cup.
3-Fill with BISSELL 2X formula to the indi-
cated fill line on the built in measuring cup
and pour it into the bladder.
4-Fill the bladder with clean hot tap water
(140F/60C MAX). *Do not boil or microwave
the water as it can destroy the bladder.
**If you are using BISSELL Boost formulas,
measure out the formula by the bottle's
instructions and add it to the bladder at this
time.
5-Return the tank lid by matching it to the
tank edges. The tank handle must be in the
forward position in order to set the lid in
place. Rotate the handle to secure the latch.
Note: Remember to secure the lid before
picking up the tank.
6-Seat the tank firmly back into the machine
base. Rotate the tank handle back into
latched position.