Special Features; Measuring Cup - Bissell PROHEAT 1846 Serie Guia Del Usuario

Special Features

2-in-1 Tank ™
1
Our 2-in-1 Tank™ system is designed with a heavy
duty bladder inside for clean water. As you clean, the
clean water in the bladder will empty and mix with the
cleaning formula. Dirty water will be pulled out of your
carpets and collect around the outside of the bladder
so that clean and dirty water are always kept separate.
This allows you to maximize tank space, yet only carry
one tank to and from the sink for filling and emptying.

Measuring Cup

2
Your deep cleaner is equipped with a measuring cup
for adding the proper amount of formula to the 2-in-1
tank. For convenience, the measuring cup is built into
the lid.
Removable Nozzle
3
Cleaning your machine after you're done has never
been easier! This nozzle pops off for rinsing in the
sink. Use the Nozzle Clean Out Tool also! Slide the tool
into the slot that touches the floor. Work the tool to
remove debris that may be caught in the nozzle.
Before You Clean
Maximize Results with your ProHeat Deep Cleaner...
• Plan activities to give your carpet time to dry.
• Move furniture to another area if cleaning an entire room (optional).
• Thoroughly vacuum area with a dry vacuum cleaner before deep cleaning.
• Plan your cleaning route to leave an exit path. It is best to begin cleaning in
the corner farthest from your exit.
• Pretreat
Pretreating your carpet is recommended to improve cleaning effectiveness
for heavily soiled carpet in high traffic areas such as entryways and hallways.
a. Spray the BISSELL Stain PreTreat formula onto heavy traffic areas,
soiled areas, or stains.
b. Allow to penetrate for at least 3 minutes.
c. Use the ProHeat machine on the high traffic setting.
www.BISSELL.com
7