Pleasant Hearth FA011TL Manual De Instrucciones página 4

ASSEMBLY INSTRUCTIONS
1. Align the bottom holes in one side rack (B) with
the corresponding holes in base (C). Make sure
the hooks on the side rack are outwards. Insert
4 bolts (AA) from outside through the holes in
side rack (B), and screw into the holes in base
(C) with screwdriver.
Repeat with second side rack (B).
Hardware Used
AA
M6 X 20mm Bolt
2. Align the holes in top panel (A) with the
corresponding holes in support bars of rack
assembly. Insert 4 bolts (BB) from top through the
holes in top panel (A), and screw into the holes in rack
assembly with screwdriver.
Hardware Used
BB
M6 X 10mm Bolt
3. Hang the tongs (D), shovel (E), brush (F) and
poker (G) on the rack assembly as illustrated.
1
x 8
2
x 4
3
D
E
4
B
C
AA
BB
A
B
F
G