Publicidad
Idiomas disponibles
Idiomas disponibles
SOFTWARE PACKAGE CYCLING DOCUMENTATION AND ANALYSIS
9. COMPARISON OF THE TWO VARIANTS PRESENTED
several patients per memory stick
Memory stick remains on / in THERA-Trainer tigo
Every patient selects his name on THERA-Trainer tigo
Memory stick is not accessible to patients while trans-
ferring the training data to the database
With several THERA-Trainer tigo trainers only one pa-
tient can save his training data
For the above reasons, medica Medizintechnik GmbH recommends the variant with several patients per memory
stick only for facilities where only one THERA-Trainer tigo is available. It would probably be practical to transfer the
entire training data into the database only once a day in order to allow patients smooth training.
For facilities with several THERA-Trainer tigo, we recommend the variant with the single patient memory stick.
10. POSSIBLE TROUBLESHOOTING:
The memory stick is connected to the computer but is not recognized by the software
Via the Select path of the memory stick interface, identify the place where the stick is located (e.g. re-
movable medium in the workstation).
If the memory stick is still not recognized by the software, the memory stick must be formatted in the
workstation.
NOTE: all data on the memory stick is lost!
The memory stick with patient data is not recognized as such by THERA-Trainer tigo
Check on the computer whether there is an update for the software on the memory stick. This folder is
needed for the software update on THERA-Trainer tigo. If this folder exists on the memory stick, save the
patient data on another memory stick or the folder on another data carrier (e.g. hard disk, other memory
stick).
The selection menu of the patient data does not appear automatically on the screen of the THERA-Trainer tigo,
once you have connected the memory stick.
Press the STOP key until the selection menu appears
If this does not work, check whether THERA-Trainer tigo's key block is active
If both previously stated options do not work, check the software version of your THERA-Trainer tigo
(should be at least version 01.04.00; simply contact us for an update): Disconnect THERA-Trainer tigo
and insert it again. You can now read the software version in the System information screen displayed
(01.02.00, 01.03.00 or 01.04.00).
The selection menu cannot be called up manually
Remove the memory stick from THERA-Trainer tigo. Then switch off the movement trainer and switch it
back on again. As soon as the THERA-Trainer tigo's start screen appears, insert the memory stick again.
The software shows wrong time and date.
Please check, if the internal time and date for the THERA-Trainer tigo are set correctly. You will need the update
software for this. If you need the current software, please do not hesitate to contact us.
Art. Nr.: A003-664
Version: 06/2013
USER MANUAL
single patient memory stick
Every patient uses his own memory stick
It is not necessary to first select a name on THERA-
Trainer tigo
It is impossible to confuse the patient data.
Several patients can train simultaneously at several de-
vices and record their training data
32
Publicidad
Capítulos
