Breitling BENTLEY SUPERSPORTS B55 Manual Del Usuario página 30

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

• The lower screen will then display up to 5 digits: tens and units of the unit selec-
ted, followed by 3 precision figures: select each one of these figures by rotating
the crown and confirming by pressing on P2 each time.
• Push the crown back to neutral.
d) Rereading a race
Once the timing is complete, pressing on P2 will automatically allow the following
parameters of a race to be displayed successively (3 seconds by display):
• To go from one race to the next
• The date of the race on the lower screen with the indication
upper screen (x being the number of the race).
• The start time of the race on the lower screen with the indication
the upper screen.
• The lap length (if supplied)
LENGTH
• The time of different laps xx on the lower screen with the indication
The best lap will be displayed as
• For each xx lap, the various y intermediate times:
• The average speed of each xx lap:
depending on the choice of distance unit for the lap length).
MPH
x, press P2 successively.
RACE
x
R
DATE
followed by the value and the unit.
xx.
BEST
xx
y
L
SPL
xx (in km/h - display
or mph - display
SPEED
KM/H
54
Then return to the
During rereading, pressing P1 enables an immediate switch to the next parameter.
Rereading mode can be exited either with a long press on P1, or by turning the
crown (changing the function).
e) Erasing one or more races
• To erase the active race, give a long press on P2 with the crown in neutral posi-
tion (
• To erase all races simultaneously, proceed as follows:
– Pull the crown into position 2
on the
– Give a long press on P2 (
– Push the crown into neutral position.
x
on
R
START
f) Recovering times
If the watch is connected to a smartphone, different times recorded may be reco-
vered using the application on the smartphone.
xx
.
L
TIME
14. REGULARITY RALLY CHRONOGRAPH (
A "regularity rally" or "TSD rally" (Time-Speed-Distance) corresponds to a stage
race for which the duration of the different stages is defined before the race as
target times. The function offers two variations:
x display on the upper screen with the total time of the race.
RACE
).
ERASE
)
EMPTy
RGRALLy
55
)

Publicidad

Tabla de contenido
loading

Tabla de contenido