KYMCO XCITING 400i Manual Del Usuario página 7

Pos. Q.ty Description
1) 1 Front mobile pulley
2) 1 Bush
3) 1 Set of 9 g weights
3) 1 Set of 10 g weights
4) 2 Shim Ø 32.5 x 25.2 x 0.5 mm
5) 1 Block holder plate
6) 4 Block
1) Thoroughly wash the intervention area.
2) Remove the plastic panels and/or fairings to reach the converter
cover (refer to the vehicle use and maintenance manual, if possible).
3) Remove the converter cover.
4) Remove the primary pulley nut.
5) Slide out the spacer bush and the whole converter assembly.
6) Insert the weights in the Top Performances pulley (kit includes two
sets of weights, the lighter set results in a sportier response).
7) Install the driving blocks on block holder plate.
8) Install the block holder plate onto Top Performances pulley.
THE KIT CONSISTS OF:
ASSEMBLY INSTRUCTIONS
7
Fig. 1